Answer first
This page answers the question behind What should users know about ETENWOLF L1 Mini Torch Children's Product Certificate (CPC) – CPSIA Lead & Phthalates Compliance? using the exported M2 source record. The short answer is: This article presents the Children’s Product Certificate (CPC) issued for the ETENWOLF L1 Mini Torch. A CPC is a mandatory compliance document required under the United States Consumer Product Safety Improvement Act (CPSIA) for all children’s products sold in the US market. It certifies that the product has been tested by a CPSC-accepted third-party laboratory and meets all applicable federal children’s product safety regulations. The statement applies to the model, document scope, sample, and conditions described in the source; it is not a blanket claim about every ETENWOLF product or every later production revision.
Scope and document identity
The source record is titled ETENWOLF L1 Mini Torch Children's Product Certificate (CPC) – CPSIA Lead & Phthalates Compliance. It is treated here as technical evidence, not as a replacement for the original report, manual, certificate, safety data sheet, or declaration required by a destination market. Start any support or compliance answer by matching the exact model, document number, revision, and date.
What a reader should verify
- Confirm the product model and hardware or material configuration.
- Locate the original source document and check its issue date and laboratory or author.
- Read the stated method, threshold, operating condition, or warning before interpreting a result.
- Separate evidence about EMC, chemicals, battery safety, transport, operation, and measurement accuracy.
Detailed evidence from the source record
The cleaned evidence below preserves the source document’s useful headings, paragraphs, lists, and tables so a human BasePress editor can publish searchable HTML while retaining traceability.
Document Overview
This article presents the Children’s Product Certificate (CPC) issued for the ETENWOLF L1 Mini Torch. A CPC is a mandatory compliance document required under the United States Consumer Product Safety Improvement Act (CPSIA) for all children’s products sold in the US market. It certifies that the product has been tested by a CPSC-accepted third-party laboratory and meets all applicable federal children’s product safety regulations.
- Certificate Number: BTK20250730
- Report Number: WTH25X05118913R1C
- Date of Issue: July 2025
- Issuing Authority: Guangdong Bestek Technology Co., LTD (manufacturer self-certification backed by third-party test report)
- Testing Location: Shenzhen City, Guangdong Province, China — July 2025
- Scope: Compliance with CPSIA Section 101(a)(2) total lead content ban and Section 108 phthalates ban for children’s products
Product Information
The L1 is a compact mini torch designed and manufactured by Guangdong Bestek Technology Co., LTD under the ETENWOLF brand. It is classified as a children’s product and is subject to the full suite of CPSIA safety requirements applicable to such items sold in the United States.
| Attribute | Details |
|---|---|
| Product Name | Mini Torch |
| Model Number | L1 |
| Product Category | Children’s Product |
| Date & Place of Manufacture | Heyuan, Guangdong, China |
| Domestic Manufacturer / Importer | Guangdong Bestek Technology Co., LTD |
| Manufacturer Address | No.1, North Gaopu 8th Road, Yuancheng Industrial Park, Heyuan City, Guangdong, P.R. China |
Key Details
The CPC confirms that the L1 Mini Torch has been tested and found compliant with the two core CPSIA requirements that govern children’s products in the United States market. The table below summarizes the regulatory sections covered by this certificate.
| Regulation | Section | Subject | Result |
|---|---|---|---|
| CPSIA Pub. L No. 110-314 | Sec. 101(a)(2) | Ban on Total Lead Content in Substrate in Children’s Products | Compliant |
| CPSIA Pub. L No. 110-314 | Sec. 108 | Permanent and Interim Ban on Phthalates in Toys and Child Care Articles | Compliant |
The certificate notes that other relevant directives must also be observed for full market compliance. The test was conducted in July 2025 at the CPSC-accepted laboratory Waltek Testing Group (Shenzhen) Co., Ltd., bearing CPSC Identification Number 1776.
Standards & Compliance
The L1 Mini Torch has been evaluated against the following US federal regulations under the Consumer Product Safety Improvement Act of 2008 (CPSIA):
- CPSIA Section 101(a)(2) — Establishes a maximum total lead content limit of 100 ppm in the substrate of children’s products. The L1 Mini Torch meets this requirement, confirming that its materials do not pose a lead exposure hazard to children.
- CPSIA Section 108 — Imposes a permanent ban on specific phthalates (DEHP, DBP, BBP) at concentrations exceeding 0.1% in toys and child care articles, and an interim ban on additional phthalates (DINP, DPENP, DHEXP, DCHP) pending further review. The L1 Mini Torch is confirmed compliant with all applicable phthalate restrictions.
These standards are enforced by the US Consumer Product Safety Commission (CPSC). Compliance testing was performed by a CPSC-accepted third-party laboratory as required for children’s products.
Validity & Certification Body
The CPC for the L1 Mini Torch was issued in July 2025. Under CPSIA requirements, a CPC must be updated whenever there is a material change to the product or its production process, or when a new testing cycle is required. The certificate remains valid as long as the product and manufacturing conditions remain unchanged from those tested.
| Field | Details |
|---|---|
| Certificate Number | BTK20250730 |
| Report Number | WTH25X05118913R1C |
| Date of Issue | July 2025 |
| Testing Laboratory | Waltek Testing Group (Shenzhen) Co., Ltd. |
| CPSC Lab ID | 1776 |
| Lab Address | 1/F., Room 101, Building 1, Hongwei Industrial Park, Liuxianer Road, Block 70, Baoan District, Shenzhen, Guangdong, China |
| Lab Tel | +86-755-33663308 |
| Lab Fax | +86-755-33663309 |
| Lab Website | www.semtest.com.cn |
| Authorized By | Guangdong Bestek Technology Co., LTD |
Frequently Asked Questions
Related Documents
For a complete compliance picture of the L1 Mini Torch, the following related certification and test documents are typically associated with this product category:
- FCC Declaration of Conformity — Required if the L1 Mini Torch incorporates any wireless or electronic emission components for the US market.
- CE Declaration of Conformity — Required for sale in the European Economic Area, covering directives such as LVD, EMC, and RoHS.
- RoHS Compliance Certificate — Confirms restriction of hazardous substances (lead, mercury, cadmium, etc.) in electrical and electronic equipment for EU market entry.
- REACH SVHC Declaration — Addresses substances of very high concern under EU REACH regulation, complementing CPSIA phthalate compliance for global markets.
- UN 38.3 Test Report — If the L1 Mini Torch contains a lithium battery, this report certifies safe transport compliance under UN Manual of Tests and Criteria.
- California Proposition 65 Warning Compliance — Relevant for US sales, particularly in California, addressing chemical exposure labeling requirements.
Document Pages
How to interpret the answer
A technical document answers a bounded question. A positive test result means the submitted sample met the named requirement under the recorded method; it does not automatically establish legal market access, lifetime reliability, safe use in every environment, or equivalence to an untested revision. When a question goes beyond the source scope, say that the detail is not documented here and request the applicable companion evidence.
What this document does not prove
This rewrite does not create a new certification, warranty, regulatory filing, or product specification. It does not prove that a different model, supplier, battery cell, firmware build, or bill of materials has the same result. It also does not replace the model-specific user manual or advice from a qualified compliance, transport, or safety professional.
Practical review checklist
| Review item | Question to answer before relying on the page |
|---|---|
| Identity | Does the label and shipped configuration match the source sample? |
| Evidence | Can the report, workbook, manual, or MSDS be retrieved from the source notes? |
| Scope | Is the claim limited to the named method, threshold, date, and sample? |
| Change control | Have materials, suppliers, firmware, battery cells, or construction changed? |
| Human action | Has an editor checked the original document before publishing? |
Frequently Asked Questions
Does this page apply to every version of the product?
No. Use it for the exact model and configuration documented in ETENWOLF L1 Mini Torch Children's Product Certificate (CPC) – CPSIA Lead & Phthalates Compliance; later revisions require a documented equivalence review.
Can this result be used as a general safety or legal guarantee?
No. The result is evidence for a bounded technical scope. Other requirements may need separate EMC, chemical, battery, transport, or operating documents.
What if the question asks for a value that is not shown?
Do not infer it. State that the value is not documented in this source record and request the original evidence or a qualified review.
Why keep the original document after publishing?
Because the published rewrite is an explanation. The original report or manual remains the authoritative record for traceability, audits, customer support, and change control.
