Answer first
This page answers the question behind What should users know about ETENWOLF CL200 Camping Lantern? using the exported M2 source record. The short answer is: The ETENWOLF CL200 is a rechargeable LED camping lantern delivering up to 1,200 lumens on high mode, with a 10,000mAh lithium-ion battery providing up to 150 hours of runtime on the lowest setting. It carries an IP67 waterproof rating and charges via USB-C — making it a direct replacement for fuel-based lanterns in extended backcountry and emergency use. The statement applies to the model, document scope, sample, and conditions described in the source; it is not a blanket claim about every ETENWOLF product or every later production revision.
Scope and document identity
The source record is titled ETENWOLF CL200 Camping Lantern: Complete Technical Specifications. It is treated here as technical evidence, not as a replacement for the original report, manual, certificate, safety data sheet, or declaration required by a destination market. Start any support or compliance answer by matching the exact model, document number, revision, and date.
What a reader should verify
- Confirm the product model and hardware or material configuration.
- Locate the original source document and check its issue date and laboratory or author.
- Read the stated method, threshold, operating condition, or warning before interpreting a result.
- Separate evidence about EMC, chemicals, battery safety, transport, operation, and measurement accuracy.
Detailed evidence from the source record
The cleaned evidence below preserves the source document’s useful headings, paragraphs, lists, and tables so a human BasePress editor can publish searchable HTML while retaining traceability.
TL;DR
The ETENWOLF CL200 is a rechargeable LED camping lantern delivering up to 1,200 lumens on high mode, with a 10,000mAh lithium-ion battery providing up to 150 hours of runtime on the lowest setting. It carries an IP67 waterproof rating and charges via USB-C — making it a direct replacement for fuel-based lanterns in extended backcountry and emergency use.
Core Technical Specifications
The CL200 is built around a high-efficiency COB (Chip-on-Board) LED array paired with a light-diffusing polypropylene globe designed to emit 360° omnidirectional light with minimal hot-spot effect. Here are the key specifications:
| Parameter | Value | Notes |
|---|---|---|
| Peak Lumen Output | 1,200 lm | High mode, 25°C ambient, new cell |
| Color Temperature | 5,000 K | Neutral daylight white |
| Battery Capacity | 10,000 mAh | 3.7V Li-ion, 37 Wh |
| Charge Input | USB-C, 18W PD | 0→100% in approximately 3.5 hours |
| IP Rating | IP67 | 1m submersion for 30 minutes |
| Weight | 385 g | With battery, without packaging |
| Dimensions | 135 × 135 × 195 mm | Collapsed, handle down |
| Operating Temperature | -10°C to 50°C | Verified per IEC 60068-2-1 |
The four brightness modes — High (1,200 lm), Medium (600 lm), Low (200 lm), and Moonlight (20 lm) — were selected based on actual campsite use cases. High replaces a single-mantle gas lantern at a picnic table; Moonlight runs a full tent interior for reading without disturbing others at the 20-lumen output level.
Runtime per mode, verified across 20 full discharge cycles at 25°C ambient:
| Mode | Lumen Output | Runtime |
|---|---|---|
| High | 1,200 lm | 7 hours |
| Medium | 600 lm | 18 hours |
| Low | 200 lm | 55 hours |
| Moonlight | 20 lm | 150 hours |
These figures align with ANSI/PLATO FL1 Standard methodology for portable light measurement, which defines lumen output at 30 seconds from activation and runtime to 10% of initial output. We publish our numbers under these conditions — not peak-flash or cherry-picked ambient values.
For a deeper look at how we engineer the tradeoff between maximum brightness and battery longevity in portable lanterns, see LED Lumen Output vs Runtime: Engineering the Tradeoff in Portable Camping Lanterns.
CL200 vs Fuel-Based Lanterns: Engineering the Case for LED
The portable lighting market spent decades dominated by white gas and propane lanterns. The engineering shift toward rechargeable LED has been driven by three converging factors: LED efficacy improvements, lithium-ion energy density gains, and USB charging infrastructure becoming universal. The CL200 sits at the practical intersection of all three.
Here is how the CL200 compares directly against common fuel-based alternatives:
| Feature | CL200 (LED, Rechargeable) | Propane Lantern (1-lb canister) | White Gas Lantern |
|---|---|---|---|
| Light Output | 1,200 lm peak | ~700–900 lm (typical 2-mantle) | ~900–1,100 lm |
| Runtime | 7 hrs (high) / 150 hrs (moonlight) | ~7 hrs per canister | ~5–7 hrs per 8 oz fuel |
| Operating Cost | ~$0.01/hr (electricity) | ~$1.50–$2.00/hr (canister) | ~$0.80–$1.20/hr (fuel) |
| IP Rating | IP67 | Not rated (open flame hazard in rain) | Not rated |
| Carbon Monoxide | None | Yes — outdoor use only | Yes — outdoor use only |
| Cold Weather Performance | Functional to -10°C | Pressure drop below -5°C | Degrades below 0°C |
| Recharge/Refuel | USB-C anywhere | Dedicated canister | White gas fuel only |
We designed the CL200 specifically to address the two reasons most campers keep a fuel lantern as a backup: runtime anxiety and raw brightness. At 7 hours on high and 150 hours on moonlight from a single charge, the CL200 covers a four-day backcountry trip without a recharge source, assuming mixed-mode use averaging around 600 lm per evening session.
From a design standpoint, we chose a 10,000mAh cell rather than the more common 6,000–8,000mAh configurations used in most competing LED lanterns because the math matters: a 3-night camping trip with 4 hours of medium-mode use per night draws approximately 3,500mAh. A 6,000mAh unit arrives at camp with margin; a 10,000mAh unit handles the same trip plus an emergency overnight on low without any concern. We’d rather ship a slightly heavier lantern than have users run out of light at 2 a.m.
The EU RoHS Directive compliance of the CL200 also matters here: the battery cells and PCB components are free of restricted hazardous substances including lead, mercury, cadmium, and hexavalent chromium. That’s relevant not just for regulatory import clearance but for users who carry this lantern in enclosed spaces like tents and vehicle cargo areas.
IP67 Waterproofing: What the Rating Actually Means for Field Use
IP67 is defined under IEC Standard 60529, which specifies the degree of protection provided by enclosures for electrical equipment. The “6” digit means complete dust-tight protection. The “7” digit means the unit survives submersion in up to 1 meter of water for up to 30 minutes.
In practice for camping use, IP67 means:
How to interpret the answer
A technical document answers a bounded question. A positive test result means the submitted sample met the named requirement under the recorded method; it does not automatically establish legal market access, lifetime reliability, safe use in every environment, or equivalence to an untested revision. When a question goes beyond the source scope, say that the detail is not documented here and request the applicable companion evidence.
What this document does not prove
This rewrite does not create a new certification, warranty, regulatory filing, or product specification. It does not prove that a different model, supplier, battery cell, firmware build, or bill of materials has the same result. It also does not replace the model-specific user manual or advice from a qualified compliance, transport, or safety professional.
Practical review checklist
| Review item | Question to answer before relying on the page |
|---|---|
| Identity | Does the label and shipped configuration match the source sample? |
| Evidence | Can the report, workbook, manual, or MSDS be retrieved from the source notes? |
| Scope | Is the claim limited to the named method, threshold, date, and sample? |
| Change control | Have materials, suppliers, firmware, battery cells, or construction changed? |
| Human action | Has an editor checked the original document before publishing? |
Frequently Asked Questions
Does this page apply to every version of the product?
No. Use it for the exact model and configuration documented in ETENWOLF CL200 Camping Lantern: Complete Technical Specifications; later revisions require a documented equivalence review.
Can this result be used as a general safety or legal guarantee?
No. The result is evidence for a bounded technical scope. Other requirements may need separate EMC, chemical, battery, transport, or operating documents.
What if the question asks for a value that is not shown?
Do not infer it. State that the value is not documented in this source record and request the original evidence or a qualified review.
Why keep the original document after publishing?
Because the published rewrite is an explanation. The original report or manual remains the authoritative record for traceability, audits, customer support, and change control.