The ETENWOLF CL3 is a 2-in-1 camping lantern and flashlight built around the largest battery in the CL series. With a 7,800 mAh / 28.86 Wh cell, 15 W USB-C PD charging, and a peak output exceeding 2,000 lumens in lantern mode, the CL3 is designed for extended off-grid use where runtime and versatility matter more than weight. A unique Red + Green LED bug-repellent function, IPX5 waterproof rating, and dual-hook mounting system round out a feature set aimed at serious campers, overlanders, and emergency preparedness kits. Launch is scheduled for September 2025.

Specifications at a Glance

>2,000 lm

Max Brightness (Lantern)

7,800 mAh

Battery Capacity

IPX5

Waterproof Rating

15 W PD

Charge Input

~3 hr

Full Charge Time

570 g

Weight

Core Performance Specifications

SpecificationDetail
Battery Capacity7,800 mAh / 28.86 Wh (Tianpeng cells)
Charge InputUSB-C PD, 15 W maximum
Charge TimeApproximately 3 hours (0–100%)
Max Brightness — Lantern Mode>2,000 lumens
Max Brightness — Flashlight Mode>400 lumens
Waterproof RatingIPX5 (water-jet resistant)
Weight570 g
Mounting OptionsSide hook + bottom hook
Bug Repellent LEDsRed + Green (specific wavelengths TBC from factory)
CertificationsCE / FCC / UN38.3 / RoHS (all pending; report numbers not yet issued)
Launch DateSeptember 2025

Lighting Modes

The CL3 offers six distinct operating modes to cover a wide range of scenarios, from ambient campsite illumination to emergency signalling.

ModeDescription
Camp Lantern360-degree ambient illumination at >2,000 lm peak; ideal for tent interiors and picnic tables
Flashlight (Torch)Focused forward beam at >400 lm for trail navigation and close-range work
Single-SideIlluminates one panel for directional ambient light without disturbing tent-mates
Bottom HangInverted hang from the bottom hook for overhead lantern position inside tents
SOS FlashInternational SOS distress pattern (3 short–3 long–3 short) for emergency signalling
Bug RepellentRed + Green LEDs emit wavelengths that discourage insects around the campsite

Bug Repellent Function

The CL3 includes dedicated Red and Green LEDs specifically for insect deterrence — a combination not found on the CL5, which carries Red only. Insects are sensitive to certain wavelengths of light; red and green emissions are less attractive to common mosquitoes and flying insects compared to white or blue light. The exact wavelength values for both LEDs are pending confirmation from the factory and will be published once the production specification sheet is finalized. The bug repellent mode is intended as a passive deterrent and works best in enclosed or semi-enclosed outdoor spaces with reduced ambient white-light competition.

CL3 vs CL5 vs CL6 — Full Comparison

SpecificationCL3CL5CL6
Battery7,800 mAh / 28.86 Wh5,000 mAh / 18.5 Wh5,000 mAh / 18.5 Wh
Charge Input15 W PD10 W PD10 W PD
Charge Time~3 hr~2–3 hr~2–3 hr
Max Brightness (Lantern)>2,000 lm>1,000 lm>700 lm
Weight570 g205 g259 g
UV ModeNoYes (365 nm)No
Bug RepellentRed + GreenRed onlyRed only
Mount OptionsSide hook + bottom hookSide hookSide hook + bottom hook
Key DifferentiatorLargest battery; dual bug-repellent LEDs365 nm UV modeLighter dual-mount design

Use Cases & Limitations

Best suited for: Multi-night backcountry camping, overlanding and vehicle camping, cabin and basecamp use, emergency home preparedness kits, group campsites where extended runtime is the priority.

Limitations to consider: At 570 g the CL3 is the heaviest unit in the CL lineup — nearly three times the weight of the CL5 (205 g). Ultralight backpackers and thru-hikers will find the CL5 or CL6 a better fit. Bug repellent LED wavelength data is not yet formally confirmed; users who require precise spectral specs should wait for the finalized production documentation. Certifications (CE, FCC, UN38.3, RoHS) are pending as of the September 2025 launch window and report numbers will be published once issued by the factory.

Frequently Asked Questions

How does the CL3 differ from the CL5 and CL6?

The CL3 carries the largest battery in the CL series at 7,800 mAh (28.86 Wh) and peaks at over 2,000 lumens in lantern mode — roughly double the CL5 (1,000 lm) and nearly three times the CL6 (700 lm). It also charges faster via 15 W PD versus 10 W PD on the CL5 and CL6. The trade-off is weight: the CL3 weighs 570 g compared to 205 g (CL5) and 259 g (CL6). The CL5 is the only model with a 365 nm UV mode; the CL3 is the only model with both Red and Green bug-repellent LEDs.

How many lumens does the CL3 put out?

In lantern mode the CL3 produces more than 2,000 lumens at peak output, making it the brightest unit in the ETENWOLF CL lineup. In flashlight (torch) mode the focused beam delivers more than 400 lumens. Multiple brightness levels are available below the peak setting to extend runtime when maximum output is not required.

Does the bug repellent feature actually work?

The Red and Green LEDs are designed to emit wavelengths that insects find less attractive compared to white or blue light sources, which are well-documented insect attractants. Many campers report a noticeable reduction in insect activity when switching from white lantern light to red or green wavelengths. The function is a passive deterrent — it does not kill insects or emit chemical repellents — and effectiveness varies by insect species, environment, and ambient light conditions. Precise wavelength values for the CL3 bug-repellent LEDs are pending final confirmation from the factory.

How long does the CL3 run on a full charge?

Runtime depends on the selected brightness mode. At peak output (over 2,000 lm in lantern mode) runtime is shorter; at mid or low brightness settings the 7,800 mAh battery delivers significantly extended runtimes. Detailed runtime tables for each mode will be published alongside the full product specification sheet upon the September 2025 launch. For reference, the CL3 battery capacity is 28.86 Wh — 56% larger than the 18.5 Wh cells used in the CL5 and CL6.

Is the CL3 waterproof?

The CL3 carries an IPX5 waterproof rating, which means it is protected against sustained low-pressure water jets from any direction. It will perform reliably in rain, splashing, and accidental drops into shallow water. IPX5 does not cover submersion; the CL3 should not be submerged underwater. The IPX5 rating is pending formal certification report issuance as of the September 2025 launch.

ZHONGSIR | Senior Technical Engineer & Product Specialist
ZHONGSIR | Senior Technical Engineer & Product Specialist

ZHONGSIR is a Senior Product Specialist at ETENWOLF, specializing in automotive electronics, portable power systems, and high-precision inflatable technology. With years of hands-on experience in hardware testing and automotive outdoor gear applications, Luca is dedicated to translating complex engineering data into clear, actionable, and reliable technical documentation for global users.

Leave a Reply

Your email address will not be published. Required fields are marked *